Metal Impact Testing Machine
Your Professional Metal Impact Testing Machine Supplier
Jinan Nake Test Equipment Co., Ltd. is a high-tech enterprise that integrates research and development, manufacturing, and sales. The company's core product lines include the electronic universal testing machine series, hydraulic universal testing machine series, dynamic fatigue testing equipment series, bending testing machine series, and impact testing machine series.
Professional Team
The company is supported by a professional team consisting of more than 20 R&D engineers, over 50 experienced manufacturing personnel, and an after-sales service team comprising more than 10 dedicated members.
Quality Certification
Our management system is certified under ISO 9001:2015, ensuring consistent and reliable product quality across all stages of production.
On-Time Delivery
We have consistently achieved an on-time delivery rate of over 98.2%, with a product defect rate below 0.3% and a rework rate under 0.28%.
Strong Capabilities
With production and office facilities covering more than 4,000 square meters, the company has been officially recognized as a National High-Tech Enterprise in China.
Parameter
|
Model |
Maximum impact energy |
Pendulum moment |
|
CYSYC150 |
150J |
80.3848Nm |
|
CYSYC150 |
300J |
160.7695Nm |
|
CYSYC150 |
450J |
241.1543Nm |
|
CYSYC150 |
600J |
321.5390Nm |
|
CYSYC150 |
750J |
401.9238Nm |
Features of Metal Impact Testing Machine
● The main frame and base are both made of cast structure, with high overall rigidity and stability.
● The main machine adopts high-rigidity design, and each force-bearing component has been analyzed and designed by finite element, and has been precision processed and tested.
● The machining center processes the front and rear bearing holes and anvil mounting positions at one time to ensure that the front and rear bearing holes are symmetrical and the distance from the balance axis axis to the striking point is accurate.
● The pendulum main shaft is supported by front and rear double bearings, with reasonable load distribution, which reduces the lateral vibration of the pendulum during impact.
● The forces on the front and rear bearings of the balance shaft are balanced, which reduces friction and reduces impact damage to the bearings.
● Imported high-precision bearings with low friction, impact resistance and long life.
● The swing rod is a thick-walled seamless tube with high stiffness and no deformation, which reduces energy absorption.
● The round body of the pendulum is precisely designed with three-dimensional software and has an accurate center of gravity.
● The impact blade is made of special materials, with high hardness, small deformation and impact resistance.
● It can be equipped with two specifications of impact blades, 2mm and 8mm (choose one), and the impact blade is fixed by screw compression, making replacement simple and convenient.
Materials That Can Be Tested by Metal Impact Testing Machine
Steel and stainless steel
1
>>
Aluminum and its alloys
2
>>
Copper and brass
3
>>
Cast iron and forged components
4
>>
Wires, rods, and metal sheets
5
Main Configuration
|
One host |
1 set |
|
300J, 150J pendulum |
Each 1 set |
|
Span template |
1set |
|
Centering template |
1 set |
|
Pendulum remover |
1 set |
|
Manual operation box |
1 set |
|
Fully enclosed protective net with transparent organic plate on the front |
1 set |
Test Steps of Metal Impact Testing Machine
Sample preparation
Cut a standardized specimen of the material to be tested, according to the relevant standard. The specimen should have a notch to create a stress concentration point where the fracture will occur during the test.
Set up the test
Secure the specimen in the fixture of the impact tester, making sure it is properly aligned and perpendicular to the impact direction. Adjust the pendulum height and angle according to the standard requirements.
Calibrate the machine
Make sure the impact tester is calibrated properly and the pendulum has the correct energy level for the test.
Perform the test
Raise the pendulum to the appropriate height, release it, and allow it to strike the specimen. The impact will cause the specimen to fracture, and the pendulum will continue to swing upward.
Measure the results
Measure the energy absorbed by the specimen during fracture, which is typically recorded in joules per meter. Repeat the test several times to obtain an average value.
Analyze the results
Compare the results obtained from the test with the relevant standard requirements or the material's specifications. Evaluate the material's toughness and determine if it meets the necessary standards for its intended application.
Record the results
Record the test results in a report, including information about the specimen, the test conditions, and the results obtained.
Ordering Process
Inquiry - Quotation - Communication - Order confirming - Deposit payment - Production - Testing and debugging - Balance payment - Packing - Delivery - Customer receiving - After service.
Packaging and Shipping
|
Packaging |
Standard export wooden box packaging |
|
Shipping |
Sea shipment, air shipment, fast courier shipment according to customer advice. |
Our Factory
2500 square meters of product assembly workshop and 700 square meters of R&D and design office building.
Our Service
1. We guarantee that you will get higher quality and better price products from us!
2. We guarantee that we will deliver the goods for you as soon as possible!
3. Our company has a professional after-sales team, thoughtful and timely service to ensure that all users can use it without worry!
4. Our product software is upgraded for free for life, and the maintenance of minor faults is free for life!
5. We promise to reply your inquiry/email as soon as possible.
Our Certificates
FAQ