Spring Torsion Testing Machine
Your Professional Spring Torsion Testing Machine Supplier
Jinan Nake Test Equipment Co., Ltd. is a high-tech enterprise that integrates research and development, manufacturing, and sales. The company's core product lines include the electronic universal testing machine series, hydraulic universal testing machine series, dynamic fatigue testing equipment series, bending testing machine series, and impact testing machine series.
Professional Team
The company is supported by a professional team consisting of more than 20 R&D engineers, over 50 experienced manufacturing personnel, and an after-sales service team comprising more than 10 dedicated members.
Quality Certification
Our management system is certified under ISO 9001:2015, ensuring consistent and reliable product quality across all stages of production.
On-Time Delivery
We have consistently achieved an on-time delivery rate of over 98.2%, with a product defect rate below 0.3% and a rework rate under 0.28%.
Strong Capabilities
With production and office facilities covering more than 4,000 square meters, the company has been officially recognized as a National High-Tech Enterprise in China.
Parameter
|
Maximum test torque |
5000Nm |
|
Torque min reading |
1Nmm |
|
Angle test range |
0-±9999.9° |
|
Torsional angle minimum reading value |
0.1° |
|
Precise measurement range |
2%-100%F.S. |
|
Spring length |
20-260mm |
|
Measurement accuracy |
Level 0.5 |
|
Rotation diameter |
200mm |
|
Power supply |
220V 50Hz |
|
The standard configuration |
Host, power cord, controller |
Types of Spring Torsion Testing Machine
The spring torsion testing machines produced by our company mainly include the following types:
0-50Nm Spring Torsion Testing Machine
TNZ-S50 spring torsion testing machine is mainly used for the measurement of medium and large range torque and torsion angle. Its measurement range is from 1Nm-50Nm.
50-500Nm Spring Torsion Testing Machine
TNZ-500 spring torsion testing machine is automatically loaded by the motor driven reducer. It is mainly used for the measurement of medium and large range torque and torsion angle. Its measurement range is from 20Nm-500Nm.
1000-5000Nm Spring Torsion Testing Machine
TNZ-5000 spring torsion testing machine is automatically loaded by the motor driven reducer. Its measurement range is from 20Nm-5000Nm.
Features of Spring Torsion Testing Machine
New External Independent Controller
This controller adds a manual control unit, providing a new solution for measurement, control, and operation.
Equipment Operation Monitoring System
Includes phase sequence and phase loss self-check indicators, and electrical overcurrent and overload protection functions, ensuring safe and reliable operation.
Sample Clamping Assembly
Converts manual push-pull adjustment to electric servo motor tuning, making operation easier and reducing labor intensity.
Power Unit
The cycloidal reducer has been upgraded to a planetary gear reducer, increasing transmission efficiency, reducing energy consumption, and minimizing noise.
Axial Force Testing System
A front-mounted axial force sensor directly detects the axial force, avoiding inaccuracies caused by clamp friction. This structure is more precise compared to rear-mounted axial force sensors.
Safety Guard
Features a full-perforated cold-rolled steel safety guard that prevents foreign objects from flying out during tests, improving safety while allowing operators to observe in real time.
Personnel Preparation
Arrange for operators who are proficient in using computers; personnel with a metrology operator's certificate will be better equipped to master the operation.
Material Preparation
Install a three-phase five-wire air switch on the wall closest to the equipment's oil source.
Foundation Construction
The foundation should be made as illustrated below. When planning the installation location, full consideration should be given to the convenience of maintenance and repair. It is recommended to reserve 500-800mm of space between the equipment and obstacles on the rear and both sides. The front of the equipment should have a minimum operating space of 2000mm.
Equipment Positioning
After positioning the main machine, place a level on the workbench to adjust the machine's level. Once leveled, the four anchor bolt holes should be filled with cement mortar. After the cement has set in the anchor bolt holes, the anchor nuts can be tightened.
Precautions for Operating the Spring Torsion Testing Machine
● Operators must carefully read the main machine manual, software manual, and testing standards; They must follow the correct operating procedures and methods.
● Each day, before testing, the equipment should be started and warmed up for 10 minutes, especially in lower temperatures during winter. After testing, the machine should be properly shut down according to the correct sequence, and all power sources should be disconnected.
● The screw rods and transmission parts should be regularly lubricated to prevent dry friction that could damage the transmission system.
● If self-made testing fixtures are used, they must not alter or damage the original structure of the product.
● If any abnormal situation occurs during operation, the power should be immediately cut off to stop the testing machine from running.
Ordering Process
1. Please tell us the model with quantity and other requirement which you needed.
2. We issue the Proforma Invoice to you after confirmed the price and other details.
3. We arrange the order production upon receipt of confirmed PI and your deposit.
4. After the goods is ready, we will inform you the shipment date and other informations by email at the same time.
Packaging and Shipping
|
Packaging |
Standard export wooden box packaging |
|
Shipping |
Sea shipment, air shipment, fast courier shipment according to customer advice. |
Our Factory
2500 square meters of product assembly workshop and 700 square meters of R&D and design office building.
Our Certificates
FAQ